Menu Covers
PU Menu Cover with Rivets
A PU menu cover finished with rivets along the spine and edge, so the binding reads as a bound book rather than a folded sheet. Rivets are specified where the menu has to survive being handled at every table and where the cover is part of the restaurant's presentation.
- Riveted binding
- Seasonal reprints
- Wipe-clean PU
- Deboss or foil logo
| Material | PU leather |
|---|---|
| Size | A4, A5, A3, Letter — or your own dimensions |
| MOQ | from 300 pcs |
| Lead time | 7–10 days sample · 25–35 days bulk |
Key data
Specs buyers ask first
| MOQ | 300 pieces portfolios · gift sets · sample books 500 pieces notebooks · ring binders · presentation packaging |
|---|---|
| Sample lead time | 7–10 days |
| Bulk lead time | 25–35 days |
| Quotation | Within one working day |
| Material | PU leather over rigid board · EVA or suede inserts |
|---|---|
| Imprint options | Foil stamping · debossing · screen print · metal badge |
| Artwork | Vector files (AI, EPS, PDF or CDR) |
| Size | Made to your dimensions |
What this one is
Riveted menu cover
The rivets run along the binding edge and hold the pages in place, which makes the page count changeable by replacing them rather than remaking the cover. That matters in a restaurant where the menu is reprinted seasonally: the cover stays, the pages change. The PU takes a debossed or foiled logo and a wipe-clean surface, which is the practical requirement in a dining room. Page capacity, number of rivets and the cover material colour are specified to order.
- Riveted binding — Pages held by rivets, so the count can be changed without remaking the cover.
- Seasonal reprints — Cover stays in service while the pages are replaced.
- Wipe-clean PU — Surface intended for handling at every table.
- Deboss or foil logo — Branding applied to the cover face.
Where it gets used
Where riveted menu covers are used
Restaurants and hotels use them where the menu is presented to every table and has to keep looking considered. Bars and clubs use them for drinks lists that change often. Catering and event companies use them for function menus. The riveted binding is chosen where page contents change more often than the cover.
What we can change for you
Made for a life of handling and wiping
This item is not picked off a shelf. Every part of it is specified before it is made, and these are the parts buyers change most often on a menu covers programme. Send whatever you have — a drawing, a photo of a sample you like, or a rough sketch — and we quote against it.
- Format — Two-panel, tri-fold, four-panel, single sheet with a clip, or a wooden board with a clamp.
- Material — PU leather, bonded leather, coated board, fabric or wood, with the sheet gauge you specify.
- Pocket — Clear film pockets, fixed printed pages, corner mounts or a screw-post refill system.
- Closure and trim — Rivets, metal corners, elastic band, ribbon, edge paint or contrast stitching.
- Branding — Foil, debossing, screen print, metal badge or a riveted metal plate.
- Packing — Poly bag, retail carton, printed header or carton only.
Anything not on this list is a question rather than a no. We work from your artwork or a rough sketch, and cutting dies and covers are engineered in-house — so a change costs you a conversation, not a new supplier.
How your order is made
Tooling, printing and binding on our own line
Menu covers are handled every service and wiped often, so the corner and the edge are the wear points. Corners, edge paint and the pocket film are specified for that life rather than for the photograph.
- Tooling and dies — cutting dies and covers are engineered in-house, so a change to the shape is a conversation rather than a new supplier.
- Printing and finishing — offset and screen printing, foil stamping, blind debossing, spot UV and edge painting all run on site.
- In-line QC — checks at cutting, stitching and packing, not only at the end. You get the inspection photos before the cartons close.
- Export and documentation — cartons, pallets, labelling and shipping documents prepared to your forwarder specification. 94.8% of what we make is exported.
Sampling
7–10 days
Production
25–35 days
Incoterms
FOB · CIF · DDP
Documents
one set per order
Factory audit report, material test reports and the pre-shipment inspection report are available on request — tell us which one your compliance team needs and we confirm it in writing.
How to order
From spec to shipment in four steps
Most buyers have a sketch, a sample, or a brief. We turn it into a confirmed sample and then into a repeatable production run.
Product type, dimensions, quantity, logo, and deadline — even a photo is enough.
Unit price, tooling, sample cost, and lead time — usually within one working day.
We make a physical sample for your review before anything goes to bulk.
In-line QC, pre-shipment photos, then packed and shipped to your forwarder.
Production & Quality
Built on our own line
Tooling, printing, finishing and packing all run in-house, so a change is a conversation rather than a new supplier.
Tooling and dies
Cutting dies and covers are engineered in-house, so a shape change is a conversation, not a new supplier.
Printing and finishing
Offset and screen printing, foil stamping, blind debossing, spot UV and edge painting all run on site.
In-line QC
Checks at cutting, stitching and packing, not only at the end. You get inspection photos before the cartons close.
Export packing
Cartons, pallets, labelling and shipping documents prepared to your forwarder specification.
Working with us
Files, tooling and terms
The same terms apply to this item and to the rest of your order, so the budget and the schedule can be planned before anything is committed.
- Artwork — Vector files (AI, EPS, PDF or CDR) are what embossing, foil and screen print need. A photo, a sketch or a physical sample is enough to start — we tell you before anything is charged if a file has to be rebuilt.
- Tooling — Charged only when the item needs a new mould, die or deboss plate. It is quoted separately and stated upfront — never added later.
- Samples — A stock sample is free (you cover the courier). A customised sample is chargeable and the cost is credited against the production order once it is confirmed.
- Payment — Invoiced in US dollars from our company account. Standard terms are T/T — 30% deposit, 70% before shipment — or an L/C at sight for container orders.
- Shipping — FOB Ningbo or Shanghai, CIF, and DDP to Europe and North America. DDP includes duties and final-mile delivery.
- Mixed containers — Several categories can ship in one container, which is how buyers keep the quantity per item down while still filling a shipment.
- Confidentiality — We sign an NDA before you send drawings.
- Documents — One inspection report and one set of documents cover the whole order, whatever the mix of items.
Buyer questions
Can the pages be replaced?
Yes. The rivets hold the pages, so the page count can be changed without remaking the cover.
Is the cover wipe-clean?
Yes. The PU surface is intended for wiping between services.
How many pages can it hold?
Page capacity is specified to order, with the rivet count set accordingly.
How do I stop the corners wearing out?
The corner is the wear point on a menu cover because it is handled and wiped at every service. Metal corners, edge paint and a heavier board all extend the life, and we will tell you which one actually earns its cost.
Can the pages be replaced without replacing the cover?
Yes. Screw-post and ring formats let you reprint and refill the pages while keeping the covers, which is normally cheaper than replacing the whole book.
Can the cover be wiped clean?
A PU or coated cover is the practical choice for a food environment, and we will tell you where a cheaper material fails rather than just what it costs.
What is the minimum order quantity?
Minimums are set per item and depend on material, tooling and finishing. The figure above is the starting point; the exact minimum is confirmed with your quote.
Do you make menu covers in A3 or a custom size?
Yes. A3, A4, A5 and Letter are routine, and a non-standard size is a cutting-die conversation.
From our workshop notes
Request a quote
Send us the spec. We'll send a number.
Unit price, tooling cost and lead time — usually within one working day.
Request a quoteWhat to send us
- Product type and target dimensions
- Quantity — and whether it may grow
- Logo and artwork, even if rough
- Your delivery deadline and market