Card & Badge Holders
PU Leather Windowed Yu-Gi-Oh Card Case, WS Deck Storage Box
A PU leather card case with a windowed front and internal dividers, built to carry a deck plus a separate storage section. The leather-wrapped body gives it the feel of a wallet rather than a plastic deck box, which is why it is often ordered for premium and gift editions. The window shows the top card as a label.
- PU leather wrap
- Windowed front
- Divided interior
- Deboss or foil
| Material | PU Leather |
|---|---|
| Size | Standard card, badge or passport size — or your own |
| MOQ | from 300 pcs |
| Lead time | 7–10 days sample · 25–35 days bulk |
Key data
Specs buyers ask first
| MOQ | 300 pieces portfolios · gift sets · sample books 500 pieces notebooks · ring binders · presentation packaging |
|---|---|
| Sample lead time | 7–10 days |
| Bulk lead time | 25–35 days |
| Quotation | Within one working day |
| Material | PU leather over rigid board · EVA or suede inserts |
|---|---|
| Imprint options | Foil stamping · debossing · screen print · metal badge |
| Artwork | Vector files (AI, EPS, PDF or CDR) |
| Size | Made to your dimensions |
What this one is
PU leather windowed deck storage
The case is wrapped in PU leather over a rigid board, with a stitched edge and a window panel on the front so the top card reads as a deck label. Inside, the space is divided: one section holds the working deck and a second section stores spares, tokens or a side deck. Because the body is wrapped rather than moulded, a logo can be debossed or foil stamped into the same surface as the stitching. Deck capacity is quoted against your card list.
- PU leather wrap — Stitched leather-look cover over a rigid board for a wallet-like finish.
- Windowed front — Top card displays through the window as a deck label.
- Divided interior — Separate sections for the working deck and spares or a side deck.
- Deboss or foil — Logo applied to the same surface as the stitching for a clean finish.
Where it gets used
Who orders leather-look deck storage
Publishers use it in premium and collector editions where the packaging has to feel as considered as the cards. Game shops stock it as their top-tier accessory. Licensing merchandise programmes commission it for official ranges. Tournament organisers hand it out as a champion prize. The purchase reason is consistent: the deck is valuable and the case is expected to look like it belongs next to it.
What we can change for you
Made for the card, the badge or the collection
This item is not picked off a shelf. Every part of it is specified before it is made, and these are the parts buyers change most often on a card & badge holders programme. Send whatever you have — a drawing, a photo of a sample you like, or a rough sketch — and we quote against it.
- Format — Single or multi-card, rigid or flexible, wallet, sleeve, pouch, zippered binder or a storage case for a collection.
- Material and thickness — PVC, PP, PU leather, paperboard, acrylic or moulded plastic, in the gauge you specify.
- Clear or opaque — Frosted, clear, tinted or solid body, with anti-glare or UV-resistant sheet where the contents have to stay readable.
- Branding — Printing on the body rather than on a sleeve, injection-moulded colour, foil, screen print or a moulded logo.
- Interior — Card slots, RFID-blocking layer, zip pocket, lanyard, retractable reel, or page sleeves for a binder.
- Packing — Individual poly bag, retail hang card, printed header or carton only.
Anything not on this list is a question rather than a no. We work from your artwork or a rough sketch, and cutting dies and covers are engineered in-house — so a change costs you a conversation, not a new supplier.
How your order is made
Tooling, printing and binding on our own line
Where a card face has to stay visible we print on the body instead of on a sleeve, and we weld rather than stitch where a seam would sit against the cards. Clear sheet is cut and welded on our own line.
- Tooling and dies — cutting dies and covers are engineered in-house, so a change to the shape is a conversation rather than a new supplier.
- Printing and finishing — offset and screen printing, foil stamping, blind debossing, spot UV and edge painting all run on site.
- In-line QC — checks at cutting, stitching and packing, not only at the end. You get the inspection photos before the cartons close.
- Export and documentation — cartons, pallets, labelling and shipping documents prepared to your forwarder specification. 94.8% of what we make is exported.
Sampling
7–10 days
Production
25–35 days
Incoterms
FOB · CIF · DDP
Documents
one set per order
Factory audit report, material test reports and the pre-shipment inspection report are available on request — tell us which one your compliance team needs and we confirm it in writing.
How to order
From spec to shipment in four steps
Most buyers have a sketch, a sample, or a brief. We turn it into a confirmed sample and then into a repeatable production run.
Product type, dimensions, quantity, logo, and deadline — even a photo is enough.
Unit price, tooling, sample cost, and lead time — usually within one working day.
We make a physical sample for your review before anything goes to bulk.
In-line QC, pre-shipment photos, then packed and shipped to your forwarder.
Production & Quality
Built on our own line
Tooling, printing, finishing and packing all run in-house, so a change is a conversation rather than a new supplier.
Tooling and dies
Cutting dies and covers are engineered in-house, so a shape change is a conversation, not a new supplier.
Printing and finishing
Offset and screen printing, foil stamping, blind debossing, spot UV and edge painting all run on site.
In-line QC
Checks at cutting, stitching and packing, not only at the end. You get inspection photos before the cartons close.
Export packing
Cartons, pallets, labelling and shipping documents prepared to your forwarder specification.
Working with us
Files, tooling and terms
The same terms apply to this item and to the rest of your order, so the budget and the schedule can be planned before anything is committed.
- Artwork — Vector files (AI, EPS, PDF or CDR) are what embossing, foil and screen print need. A photo, a sketch or a physical sample is enough to start — we tell you before anything is charged if a file has to be rebuilt.
- Tooling — Charged only when the item needs a new mould, die or deboss plate. It is quoted separately and stated upfront — never added later.
- Samples — A stock sample is free (you cover the courier). A customised sample is chargeable and the cost is credited against the production order once it is confirmed.
- Payment — Invoiced in US dollars from our company account. Standard terms are T/T — 30% deposit, 70% before shipment — or an L/C at sight for container orders.
- Shipping — FOB Ningbo or Shanghai, CIF, and DDP to Europe and North America. DDP includes duties and final-mile delivery.
- Mixed containers — Several categories can ship in one container, which is how buyers keep the quantity per item down while still filling a shipment.
- Confidentiality — We sign an NDA before you send drawings.
- Documents — One inspection report and one set of documents cover the whole order, whatever the mix of items.
Buyer questions
Is the interior divider fixed?
It is built in as standard. We can change the divider position or remove it to suit your deck layout.
Does the leather-look cover accept embossing?
Yes. Debossing and foil stamping both apply cleanly to the PU surface.
Can the window be omitted?
Yes. A windowless version can be produced if you prefer a plain front panel.
Will a PVC sleeve damage the card or the photo inside it?
A card that has sat in the wrong sleeve for two years does not look damaged until it is taken out — the plastic has reacted with it rather than scratched it. Tell us what goes inside and we select a sheet that will not migrate, which matters most for photographs and coated cards.
Can the colour be matched to our brand exactly?
On injection-moulded parts the colour is in the material, so the branding is carried by the tooling rather than by a print step — one colour, one identity, and no print to rub off. Send a Pantone reference and we match to a physical chip.
Do you make RFID-blocking holders?
Yes. The blocking layer sits between the card slots and the outside face; tell us which cards must be protected so the layout stays usable.
What is the minimum order quantity?
Minimums are set per item: small moulded parts and low unit-price accessories carry a higher minimum than leather programmes. We confirm the exact figure with your quote.
Can you supply holders that are not on this page?
Yes. This site shows our main lines, and we regularly supply drinkware, bags, tech accessories, labels and retail packaging alongside them — everything ships in one order.
From our workshop notes
Request a quote
Send us the spec. We'll send a number.
Unit price, tooling cost and lead time — usually within one working day.
Request a quoteWhat to send us
- Product type and target dimensions
- Quantity — and whether it may grow
- Logo and artwork, even if rough
- Your delivery deadline and market