EVA & Plastic Cases
Transparent Mini Waterproof Protective Case / Waterproof Bag
A transparent mini waterproof case that doubles as a pouch, sized to hold a phone, a passport or small items while keeping them visible and dry. The transparent face means identification never requires opening the case, which is what makes it usable at a beach, on a boat or in the rain.
- Transparent body
- Waterproof closure
- Mini format
- Lanyard point
| Material | EVA, PVC, PP, nylon or leather-faced EVA |
|---|---|
| Size | Made to your dimensions |
| MOQ | from 300 pcs |
| Lead time | 7–10 days sample · 25–35 days bulk |
Key data
Specs buyers ask first
| MOQ | 300 pieces portfolios · gift sets · sample books 500 pieces notebooks · ring binders · presentation packaging |
|---|---|
| Sample lead time | 7–10 days |
| Bulk lead time | 25–35 days |
| Quotation | Within one working day |
| Material | PU leather over rigid board · EVA or suede inserts |
|---|---|
| Imprint options | Foil stamping · debossing · screen print · metal badge |
| Artwork | Vector files (AI, EPS, PDF or CDR) |
| Size | Made to your dimensions |
What this one is
Transparent waterproof pouch
The case is sealed with a closure that keeps water out, and the transparent body means the contents stay readable without opening it. That combination is what separates it from an opaque dry bag: a phone can be used through the film and a pass or ticket can be shown without unsealing it. It is cut in a mini format for a phone or a passport, with a lanyard point at the top. Film thickness, closure type and size are specified against what is being carried.
- Transparent body — Contents stay readable and usable without opening the case.
- Waterproof closure — Keeps water out at the beach, on a boat or in rain.
- Mini format — Sized for a phone, a passport or small valuables.
- Lanyard point — Carried around the neck or clipped to a bag.
Where it gets used
Who buys transparent waterproof cases
Travel and outdoor retailers stock them as a seasonal accessory. Resorts, dive operators and boat charter companies issue them to guests. Event organisers use them for outdoor festivals and water sports. Corporate programmes use them branded where the audience is outdoors. The transparent face is the reason for choosing this over a dry bag.
What we can change for you
Made to protect what goes inside
This item is not picked off a shelf. Every part of it is specified before it is made, and these are the parts buyers change most often on a eva & plastic cases programme. Send whatever you have — a drawing, a photo of a sample you like, or a rough sketch — and we quote against it.
- Device fit — Cut to the exact tablet or phone model, with the camera and port openings in the right place.
- Water resistance — Pouch, welded shell or a sealed case, in the grade of protection you specify.
- Touch-through window — Clear or frosted front face that still allows the screen to be used.
- Attachment — Lanyard, carabiner, handle, or a strap that fits the way it will be carried.
- Interior — Foam or EVA padding, card pockets, cable storage.
- Branding — Screen print, foil, debossing or a moulded logo.
Anything not on this list is a question rather than a no. We work from your artwork or a rough sketch, and cutting dies and covers are engineered in-house — so a change costs you a conversation, not a new supplier.
How your order is made
Tooling, printing and binding on our own line
EVA shells are moulded and the insert dies are cut to your product. The insert is what protects the contents — a case with a generic insert protects the box, not the goods.
- Tooling and dies — cutting dies and covers are engineered in-house, so a change to the shape is a conversation rather than a new supplier.
- Printing and finishing — offset and screen printing, foil stamping, blind debossing, spot UV and edge painting all run on site.
- In-line QC — checks at cutting, stitching and packing, not only at the end. You get the inspection photos before the cartons close.
- Export and documentation — cartons, pallets, labelling and shipping documents prepared to your forwarder specification. 94.8% of what we make is exported.
Sampling
7–10 days
Production
25–35 days
Incoterms
FOB · CIF · DDP
Documents
one set per order
Factory audit report, material test reports and the pre-shipment inspection report are available on request — tell us which one your compliance team needs and we confirm it in writing.
How to order
From spec to shipment in four steps
Most buyers have a sketch, a sample, or a brief. We turn it into a confirmed sample and then into a repeatable production run.
Product type, dimensions, quantity, logo, and deadline — even a photo is enough.
Unit price, tooling, sample cost, and lead time — usually within one working day.
We make a physical sample for your review before anything goes to bulk.
In-line QC, pre-shipment photos, then packed and shipped to your forwarder.
Production & Quality
Built on our own line
Tooling, printing, finishing and packing all run in-house, so a change is a conversation rather than a new supplier.
Tooling and dies
Cutting dies and covers are engineered in-house, so a shape change is a conversation, not a new supplier.
Printing and finishing
Offset and screen printing, foil stamping, blind debossing, spot UV and edge painting all run on site.
In-line QC
Checks at cutting, stitching and packing, not only at the end. You get inspection photos before the cartons close.
Export packing
Cartons, pallets, labelling and shipping documents prepared to your forwarder specification.
Working with us
Files, tooling and terms
The same terms apply to this item and to the rest of your order, so the budget and the schedule can be planned before anything is committed.
- Artwork — Vector files (AI, EPS, PDF or CDR) are what embossing, foil and screen print need. A photo, a sketch or a physical sample is enough to start — we tell you before anything is charged if a file has to be rebuilt.
- Tooling — Charged only when the item needs a new mould, die or deboss plate. It is quoted separately and stated upfront — never added later.
- Samples — A stock sample is free (you cover the courier). A customised sample is chargeable and the cost is credited against the production order once it is confirmed.
- Payment — Invoiced in US dollars from our company account. Standard terms are T/T — 30% deposit, 70% before shipment — or an L/C at sight for container orders.
- Shipping — FOB Ningbo or Shanghai, CIF, and DDP to Europe and North America. DDP includes duties and final-mile delivery.
- Mixed containers — Several categories can ship in one container, which is how buyers keep the quantity per item down while still filling a shipment.
- Confidentiality — We sign an NDA before you send drawings.
- Documents — One inspection report and one set of documents cover the whole order, whatever the mix of items.
Buyer questions
Can a phone be used inside the case?
Yes. The transparent film allows the screen to be operated without opening the case.
How is it sealed?
A waterproof closure seals the opening. Tell us whether you need a roll-top, a zip-lock or a clip closure.
What sizes are available?
The mini format suits a phone or a passport. Larger sizes can be quoted.
How do you make sure the case actually protects the product?
The insert is die-cut to the product footprint and depth, so the contents cannot move inside the shell. Send the item or its exact dimensions and we cut to it.
What does "waterproof" mean on your EVA and PVC cases?
It describes the material and the seam construction we supply on the grade we ship. Welded seams hold water out better than stitched ones; ask us for the material specification on the exact grade.
Can the case be used with the device inside it?
Yes, where a touch-through face is specified. Tell us the model and we will cut the openings and choose the face film so the screen and the camera both still work.
Can the case be moulded in a custom shape?
Yes, but a new shape means a new mould, and the tooling cost is quoted separately and stated upfront. Send a sketch or a sample and we will tell you honestly what the tooling takes.
What is the minimum order quantity?
Minimums are set per item and depend on mould, material and insert. The figure above is the starting point; the exact minimum is confirmed with your quote.
Can different products share one case?
Yes. A single insert can be cut with more than one cavity, which is common for accessory kits.
From our workshop notes
Request a quote
Send us the spec. We'll send a number.
Unit price, tooling cost and lead time — usually within one working day.
Request a quoteWhat to send us
- Product type and target dimensions
- Quantity — and whether it may grow
- Logo and artwork, even if rough
- Your delivery deadline and market