Portfolios & Document Cases
Durable Zipper Padfolio Custom PU Leather Business Portfolio
A zippered padfolio built for wear rather than for presentation. The PU is heavier than the standard grade, the zip is set into a reinforced seam and the corners are bound, so the folder survives daily carriage in a bag or on a vehicle seat.
- Reinforced zip seam
- Heavier grade PU
- Bound corners
- Standard padfolio interior
| Material | PU Leather |
|---|---|
| Size | A4, A5, Letter, Legal — or your own dimensions |
| MOQ | from 500 pcs |
| Lead time | 7–10 days sample · 25–35 days bulk |
Key data
Specs buyers ask first
| MOQ | 300 pieces portfolios · gift sets · sample books 500 pieces notebooks · ring binders · presentation packaging |
|---|---|
| Sample lead time | 7–10 days |
| Bulk lead time | 25–35 days |
| Quotation | Within one working day |
| Material | PU leather over rigid board · EVA or suede inserts |
|---|---|
| Imprint options | Foil stamping · debossing · screen print · metal badge |
| Artwork | Vector files (AI, EPS, PDF or CDR) |
| Size | Made to your dimensions |
What this one is
Built for daily carriage
The difference between this padfolio and a standard one is where the stress lands. A perimeter zip pulls on the seam every time the folder is opened and closed, so the zip is set into a reinforced seam rather than a single stitch line. The PU is a heavier grade with a thicker backing, and the corners are bound rather than simply folded, which is where most folios fail first. Inside, the layout is the standard padfolio: pad on a clip, document pocket and card slots. The heavier construction is quoted against the intended service life.
- Reinforced zip seam — Zip set into a reinforced seam where opening and closing stress concentrates.
- Heavier grade PU — Thicker material and backing than the standard folio grade.
- Bound corners — Corners bound rather than folded, since that is where folios fail first.
- Standard padfolio interior — Pad on clip, document pocket and card slots.
Where it gets used
Who needs a heavier padfolio
Field engineers and service technicians carry a folio every working day and open it many times. Logistics and fleet staff keep paperwork with them in vehicles. Site supervisors use one for documentation that gets handled with working hands. Where a folio is replaced annually, the lighter version is fine; where it has to last several years, the reinforced construction is cheaper over its life.
What we can change for you
Made to your drawing, not to our catalogue
This item is not picked off a shelf. Every part of it is specified before it is made, and these are the parts buyers change most often on a portfolios & document cases programme. Send whatever you have — a drawing, a photo of a sample you like, or a rough sketch — and we quote against it.
- Outer size and orientation — A4, A5, Letter or Legal, portrait or landscape, or a size we cut to your drawing.
- Cover material and caliper — PU leather, bonded leather, linen or coated paper board — padded, semi-rigid or rigid, with the board thickness you specify.
- Closure — Zipper, magnetic flap, buckle, elastic strap or press stud. Zips can be nylon or metal, with a custom puller.
- Interior layout — Pockets, card slots, pen loop, A5 or A4 notepad, ring mechanism, document dividers, tablet sleeve, or a power-bank / wireless-charging module.
- Branding — Foil stamping, blind debossing, screen print, spot UV, edge painting or a metal badge.
- Hardware and trim — Metal corners, rivets, carry handle, contrast stitching, lining colour and edge-paint colour.
- Retail packing — Printed belly band, rigid gift box, PVC inner bag, hang tag — or carton only for bulk programmes.
Anything not on this list is a question rather than a no. We work from your artwork or a rough sketch, and cutting dies and covers are engineered in-house — so a change costs you a conversation, not a new supplier.
How your order is made
Tooling, printing and binding on our own line
Covers are cut and wrapped in our own workshop, and the zips, magnets or ring mechanisms are fitted on the same line. That is why the sampling date we give you is one we can hold.
- Tooling and dies — cutting dies and covers are engineered in-house, so a change to the shape is a conversation rather than a new supplier.
- Printing and finishing — offset and screen printing, foil stamping, blind debossing, spot UV and edge painting all run on site.
- In-line QC — checks at cutting, stitching and packing, not only at the end. You get the inspection photos before the cartons close.
- Export and documentation — cartons, pallets, labelling and shipping documents prepared to your forwarder specification. 94.8% of what we make is exported.
Sampling
7–10 days
Production
25–35 days
Incoterms
FOB · CIF · DDP
Documents
one set per order
Factory audit report, material test reports and the pre-shipment inspection report are available on request — tell us which one your compliance team needs and we confirm it in writing.
How to order
From spec to shipment in four steps
Most buyers have a sketch, a sample, or a brief. We turn it into a confirmed sample and then into a repeatable production run.
Product type, dimensions, quantity, logo, and deadline — even a photo is enough.
Unit price, tooling, sample cost, and lead time — usually within one working day.
We make a physical sample for your review before anything goes to bulk.
In-line QC, pre-shipment photos, then packed and shipped to your forwarder.
Production & Quality
Built on our own line
Tooling, printing, finishing and packing all run in-house, so a change is a conversation rather than a new supplier.
Tooling and dies
Cutting dies and covers are engineered in-house, so a shape change is a conversation, not a new supplier.
Printing and finishing
Offset and screen printing, foil stamping, blind debossing, spot UV and edge painting all run on site.
In-line QC
Checks at cutting, stitching and packing, not only at the end. You get inspection photos before the cartons close.
Export packing
Cartons, pallets, labelling and shipping documents prepared to your forwarder specification.
Working with us
Files, tooling and terms
The same terms apply to this item and to the rest of your order, so the budget and the schedule can be planned before anything is committed.
- Artwork — Vector files (AI, EPS, PDF or CDR) are what embossing, foil and screen print need. A photo, a sketch or a physical sample is enough to start — we tell you before anything is charged if a file has to be rebuilt.
- Tooling — Charged only when the item needs a new mould, die or deboss plate. It is quoted separately and stated upfront — never added later.
- Samples — A stock sample is free (you cover the courier). A customised sample is chargeable and the cost is credited against the production order once it is confirmed.
- Payment — Invoiced in US dollars from our company account. Standard terms are T/T — 30% deposit, 70% before shipment — or an L/C at sight for container orders.
- Shipping — FOB Ningbo or Shanghai, CIF, and DDP to Europe and North America. DDP includes duties and final-mile delivery.
- Mixed containers — Several categories can ship in one container, which is how buyers keep the quantity per item down while still filling a shipment.
- Confidentiality — We sign an NDA before you send drawings.
- Documents — One inspection report and one set of documents cover the whole order, whatever the mix of items.
Buyer questions
How is this stronger than the standard padfolio?
The zip sits in a reinforced seam, the PU is a heavier grade and the corners are bound rather than folded.
Will the zip fail under daily use?
The reinforced seam is designed for daily opening. We can also quote a metal-toothed zip for heavier service.
Can it be branded the same way?
Yes. Deboss, foil and screen print all apply to this grade of PU.
Can you work from a sample or a photo instead of a drawing?
Yes. A photo of a competitor’s sample, a physical sample or a rough sketch is enough to start. We return a written specification for approval before any tooling is cut.
Which logo methods can be used on the cover?
Foil stamping, blind debossing, screen print, spot UV or a metal badge. On PU we adjust the debossing depth to the sheet thickness so the impression stays sharp and does not crack along the fold.
Will a reorder match the first run?
We hold the approved specification on file — material, caliper, lining, foil colour, stitch and packing — and manufacture repeat orders against it instead of starting over.
What is the minimum order quantity?
Minimums are set per item and depend on material, tooling and finish. This item starts from 500 pcs; the exact minimum is confirmed with your quote.
How do you stop the cover from cracking at the spine?
Board caliper and hinge allowance are specified together, not separately. On padded covers we add a hinge allowance at the fold, which is where most portfolios fail first.
From our workshop notes
- How Long Will PU Last?
- PU Leather Grades: What Your Hand Can Tell You
- The A4 Document Manager: Specifying One Right
Project record
12,000 zippered portfolios for a bank’s advisor onboarding programme
Request a quote
Send us the spec. We'll send a number.
Unit price, tooling cost and lead time — usually within one working day.
Request a quoteWhat to send us
- Product type and target dimensions
- Quantity — and whether it may grow
- Logo and artwork, even if rough
- Your delivery deadline and market