Portfolios & Document Cases
Leather Business Padfolio with Zipper
A leather business padfolio with a zippered closure, finished as an executive item rather than an office consumable. The leather-look cover is smooth and the stitching is set in a single line, so the folder reads as a considered piece when handed over in a meeting.
- Smooth leather-look cover
- Metal zip pull
- Large branding area
- Personalisation
| Material | PU Leather |
|---|---|
| Size | A4, A5, Letter, Legal — or your own dimensions |
| MOQ | from 300 pcs |
| Lead time | 7–10 days sample · 25–35 days bulk |
Key data
Specs buyers ask first
| MOQ | 300 pieces portfolios · gift sets · sample books 500 pieces notebooks · ring binders · presentation packaging |
|---|---|
| Sample lead time | 7–10 days |
| Bulk lead time | 25–35 days |
| Quotation | Within one working day |
| Material | PU leather over rigid board · EVA or suede inserts |
|---|---|
| Imprint options | Foil stamping · debossing · screen print · metal badge |
| Artwork | Vector files (AI, EPS, PDF or CDR) |
| Size | Made to your dimensions |
What this one is
Executive leather padfolio
This padfolio is specified where the item is a gift rather than a supply item. The cover is a smooth leather-look material with a fine grain, the stitching runs in a single clean line and the zip pull is a metal fitting rather than a moulded tab. Inside, the pad sits on a clip with a document pocket and card slots. The front face takes a large deboss or a foiled logo, and it can be blind-embossed with a name for one-to-one gifting.
- Smooth leather-look cover — Fine grain finish with a single clean stitch line.
- Metal zip pull — Fitting rather than a moulded tab, for a gift-grade finish.
- Large branding area — Front face takes a big deboss or a foiled logo.
- Personalisation — Blind emboss of a name or initials for individual gifting.
Where it gets used
Where an executive padfolio is used
Companies issue them to senior hires and to departing staff. Professional firms hand them to partners and long-standing clients. Event organisers use them as speaker and award gifts. The purchase is usually triggered by an occasion rather than a stock requirement, which is why personalisation and the quality of the zip fitting matter more here than on a bulk office order.
What we can change for you
Made to your drawing, not to our catalogue
This item is not picked off a shelf. Every part of it is specified before it is made, and these are the parts buyers change most often on a portfolios & document cases programme. Send whatever you have — a drawing, a photo of a sample you like, or a rough sketch — and we quote against it.
- Outer size and orientation — A4, A5, Letter or Legal, portrait or landscape, or a size we cut to your drawing.
- Cover material and caliper — PU leather, bonded leather, linen or coated paper board — padded, semi-rigid or rigid, with the board thickness you specify.
- Closure — Zipper, magnetic flap, buckle, elastic strap or press stud. Zips can be nylon or metal, with a custom puller.
- Interior layout — Pockets, card slots, pen loop, A5 or A4 notepad, ring mechanism, document dividers, tablet sleeve, or a power-bank / wireless-charging module.
- Branding — Foil stamping, blind debossing, screen print, spot UV, edge painting or a metal badge.
- Hardware and trim — Metal corners, rivets, carry handle, contrast stitching, lining colour and edge-paint colour.
- Retail packing — Printed belly band, rigid gift box, PVC inner bag, hang tag — or carton only for bulk programmes.
Anything not on this list is a question rather than a no. We work from your artwork or a rough sketch, and cutting dies and covers are engineered in-house — so a change costs you a conversation, not a new supplier.
How your order is made
Tooling, printing and binding on our own line
Covers are cut and wrapped in our own workshop, and the zips, magnets or ring mechanisms are fitted on the same line. That is why the sampling date we give you is one we can hold.
- Tooling and dies — cutting dies and covers are engineered in-house, so a change to the shape is a conversation rather than a new supplier.
- Printing and finishing — offset and screen printing, foil stamping, blind debossing, spot UV and edge painting all run on site.
- In-line QC — checks at cutting, stitching and packing, not only at the end. You get the inspection photos before the cartons close.
- Export and documentation — cartons, pallets, labelling and shipping documents prepared to your forwarder specification. 94.8% of what we make is exported.
Sampling
7–10 days
Production
25–35 days
Incoterms
FOB · CIF · DDP
Documents
one set per order
Factory audit report, material test reports and the pre-shipment inspection report are available on request — tell us which one your compliance team needs and we confirm it in writing.
How to order
From spec to shipment in four steps
Most buyers have a sketch, a sample, or a brief. We turn it into a confirmed sample and then into a repeatable production run.
Product type, dimensions, quantity, logo, and deadline — even a photo is enough.
Unit price, tooling, sample cost, and lead time — usually within one working day.
We make a physical sample for your review before anything goes to bulk.
In-line QC, pre-shipment photos, then packed and shipped to your forwarder.
Production & Quality
Built on our own line
Tooling, printing, finishing and packing all run in-house, so a change is a conversation rather than a new supplier.
Tooling and dies
Cutting dies and covers are engineered in-house, so a shape change is a conversation, not a new supplier.
Printing and finishing
Offset and screen printing, foil stamping, blind debossing, spot UV and edge painting all run on site.
In-line QC
Checks at cutting, stitching and packing, not only at the end. You get inspection photos before the cartons close.
Export packing
Cartons, pallets, labelling and shipping documents prepared to your forwarder specification.
Working with us
Files, tooling and terms
The same terms apply to this item and to the rest of your order, so the budget and the schedule can be planned before anything is committed.
- Artwork — Vector files (AI, EPS, PDF or CDR) are what embossing, foil and screen print need. A photo, a sketch or a physical sample is enough to start — we tell you before anything is charged if a file has to be rebuilt.
- Tooling — Charged only when the item needs a new mould, die or deboss plate. It is quoted separately and stated upfront — never added later.
- Samples — A stock sample is free (you cover the courier). A customised sample is chargeable and the cost is credited against the production order once it is confirmed.
- Payment — Invoiced in US dollars from our company account. Standard terms are T/T — 30% deposit, 70% before shipment — or an L/C at sight for container orders.
- Shipping — FOB Ningbo or Shanghai, CIF, and DDP to Europe and North America. DDP includes duties and final-mile delivery.
- Mixed containers — Several categories can ship in one container, which is how buyers keep the quantity per item down while still filling a shipment.
- Confidentiality — We sign an NDA before you send drawings.
- Documents — One inspection report and one set of documents cover the whole order, whatever the mix of items.
Buyer questions
Is this real leather?
It is a leather-look material. Genuine leather construction can be quoted if required.
Can names be embossed individually?
Yes. Blind emboss or foil of a name or initials is standard for gift runs.
How does it differ from the standard padfolio?
Smoother cover, a metal zip pull and a single clean stitch line aimed at gift use rather than bulk supply.
Can you work from a sample or a photo instead of a drawing?
Yes. A photo of a competitor’s sample, a physical sample or a rough sketch is enough to start. We return a written specification for approval before any tooling is cut.
Which logo methods can be used on the cover?
Foil stamping, blind debossing, screen print, spot UV or a metal badge. On PU we adjust the debossing depth to the sheet thickness so the impression stays sharp and does not crack along the fold.
Will a reorder match the first run?
We hold the approved specification on file — material, caliper, lining, foil colour, stitch and packing — and manufacture repeat orders against it instead of starting over.
What is the minimum order quantity?
Minimums are set per item and depend on material, tooling and finish. This item starts from 300 pcs; the exact minimum is confirmed with your quote.
How do you stop the cover from cracking at the spine?
Board caliper and hinge allowance are specified together, not separately. On padded covers we add a hinge allowance at the fold, which is where most portfolios fail first.
From our workshop notes
- How Long Will PU Last?
- PU Leather Grades: What Your Hand Can Tell You
- The A4 Document Manager: Specifying One Right
Project record
12,000 zippered portfolios for a bank’s advisor onboarding programme
Request a quote
Send us the spec. We'll send a number.
Unit price, tooling cost and lead time — usually within one working day.
Request a quoteWhat to send us
- Product type and target dimensions
- Quantity — and whether it may grow
- Logo and artwork, even if rough
- Your delivery deadline and market