Jewelry & Storage Boxes
6-Layer PU Jewellery Box
A six-layer PU jewellery box, the tallest format in the storage range. Six separate layers let a large collection be stored one category per layer in a single footprint, which is the alternative to owning several smaller boxes that have to be found and opened separately.
- Six independent layers
- Large capacity, small footprint
- Per-layer inserts
- Uniform PU wrap
| Material | PU Leather |
|---|---|
| Size | Made to your dimensions |
| MOQ | from 500 pcs |
| Lead time | 7–10 days sample · 25–35 days bulk |
Key data
Specs buyers ask first
| MOQ | 300 pieces portfolios · gift sets · sample books 500 pieces notebooks · ring binders · presentation packaging |
|---|---|
| Sample lead time | 7–10 days |
| Bulk lead time | 25–35 days |
| Quotation | Within one working day |
| Material | PU leather over rigid board · EVA or suede inserts |
|---|---|
| Imprint options | Foil stamping · debossing · screen print · metal badge |
| Artwork | Vector files (AI, EPS, PDF or CDR) |
| Size | Made to your dimensions |
What this one is
Six-layer storage stack
At six layers the box becomes the storage rather than a place to put a few pieces. Each layer is separate and holds its own insert, so rings, earrings, necklaces, bracelets, watches and odd pieces each get a layer, and opening one layer does not disturb the rest. Because the capacity is vertical, the footprint stays close to that of a two-layer box while the volume is several times greater. The PU wrap is applied to all four sides so the stack presents as one object.
- Six independent layers — One per category, and opening one does not disturb the others.
- Large capacity, small footprint — Volume grows upwards rather than across the table.
- Per-layer inserts — Ring roll, trays, dividers and watch pillows as required.
- Uniform PU wrap — All four sides finished so the stack reads as one piece.
Where it gets used
Who buys a six-layer box
Collectors and households with a large collection use one box rather than several. Retailers use them for back-of-counter stock where categories must stay separate and reachable. Hotels and suites use them where several guest categories must be stored in one unit. The layer count is the reason for the purchase.
What we can change for you
Specified for how it will be opened and closed
This item is not picked off a shelf. Every part of it is specified before it is made, and these are the parts buyers change most often on a jewelry & storage boxes programme. Send whatever you have — a drawing, a photo of a sample you like, or a rough sketch — and we quote against it.
- Tier and layout — Single layer, three, five or ten tiers, drawer or lift-lid, in the drawer count your assortment needs.
- Lining — Velvet, suede, flocked fabric or PU, in the colour you specify, with anti-tarnish lining where silver is stored.
- Inserts — Ring rolls, watch pillows in the right circumference, necklace hooks, earring cards, or removable trays.
- Closure and hardware — Cam lock, magnetic closure, key lock, mirror in the lid, handles or a trolley base.
- Cover — PU leather, genuine leather, wood, acrylic panels or a glass window.
- Branding — Foil stamping, debossing, printed inner lid, metal badge or an engraved plate.
Anything not on this list is a question rather than a no. We work from your artwork or a rough sketch, and cutting dies and covers are engineered in-house — so a change costs you a conversation, not a new supplier.
How your order is made
Tooling, printing and binding on our own line
The lining is what the buyer sees and the drawer is what fails. Drawer runners, divider fixing and lining adhesive are specified together, and the insert is cut to your actual pieces rather than to a nominal ring or watch size.
- Tooling and dies — cutting dies and covers are engineered in-house, so a change to the shape is a conversation rather than a new supplier.
- Printing and finishing — offset and screen printing, foil stamping, blind debossing, spot UV and edge painting all run on site.
- In-line QC — checks at cutting, stitching and packing, not only at the end. You get the inspection photos before the cartons close.
- Export and documentation — cartons, pallets, labelling and shipping documents prepared to your forwarder specification. 94.8% of what we make is exported.
Sampling
7–10 days
Production
25–35 days
Incoterms
FOB · CIF · DDP
Documents
one set per order
Factory audit report, material test reports and the pre-shipment inspection report are available on request — tell us which one your compliance team needs and we confirm it in writing.
How to order
From spec to shipment in four steps
Most buyers have a sketch, a sample, or a brief. We turn it into a confirmed sample and then into a repeatable production run.
Product type, dimensions, quantity, logo, and deadline — even a photo is enough.
Unit price, tooling, sample cost, and lead time — usually within one working day.
We make a physical sample for your review before anything goes to bulk.
In-line QC, pre-shipment photos, then packed and shipped to your forwarder.
Production & Quality
Built on our own line
Tooling, printing, finishing and packing all run in-house, so a change is a conversation rather than a new supplier.
Tooling and dies
Cutting dies and covers are engineered in-house, so a shape change is a conversation, not a new supplier.
Printing and finishing
Offset and screen printing, foil stamping, blind debossing, spot UV and edge painting all run on site.
In-line QC
Checks at cutting, stitching and packing, not only at the end. You get inspection photos before the cartons close.
Export packing
Cartons, pallets, labelling and shipping documents prepared to your forwarder specification.
Working with us
Files, tooling and terms
The same terms apply to this item and to the rest of your order, so the budget and the schedule can be planned before anything is committed.
- Artwork — Vector files (AI, EPS, PDF or CDR) are what embossing, foil and screen print need. A photo, a sketch or a physical sample is enough to start — we tell you before anything is charged if a file has to be rebuilt.
- Tooling — Charged only when the item needs a new mould, die or deboss plate. It is quoted separately and stated upfront — never added later.
- Samples — A stock sample is free (you cover the courier). A customised sample is chargeable and the cost is credited against the production order once it is confirmed.
- Payment — Invoiced in US dollars from our company account. Standard terms are T/T — 30% deposit, 70% before shipment — or an L/C at sight for container orders.
- Shipping — FOB Ningbo or Shanghai, CIF, and DDP to Europe and North America. DDP includes duties and final-mile delivery.
- Mixed containers — Several categories can ship in one container, which is how buyers keep the quantity per item down while still filling a shipment.
- Confidentiality — We sign an NDA before you send drawings.
- Documents — One inspection report and one set of documents cover the whole order, whatever the mix of items.
Buyer questions
Is six the maximum layer count?
Higher counts can be built. The stack uses the same construction at any layer count.
Will the stack be stable when loaded?
The layers are built on rigid panels and the stack is stable at the height specified. Tell us the loaded weight and we confirm.
Can layers be added later?
Later layers are produced as separate units. Tell us the target count at the first order so the construction matches.
Why do drawers stick and dividers come away?
In a jewelry box the visible quality is the lining and the visible failure is the drawer. Dividers coming away, drawers that stick or drop, and contents that mix as soon as the box is moved are the three complaints that come back most often — all three are decided by the runner, the tray fixing and the lining adhesive.
Will a silver chain tarnish inside the box?
Tarnish is a chemical reaction and a closed box is a small space full of materials that can feed it. Tell us silver will be stored and we select anti-tarnish lining and adhesives rather than a standard felt.
How do I choose the right watch pillow size?
Read enough reviews and the same sentence appears from both ends — pillows too small so watches rattle, or too big so a bracelet will not close. Both are correct. Give us the bracelet circumference range and we size the pillow to it.
Should I buy a display box or a storage box?
One is looked at; the other is opened and closed for years. Buy both if you need both. If one box has to do both jobs, decide which job it is allowed to fail at, and we will build to that.
What is the minimum order quantity?
Jewelry and storage boxes start from 500 pieces. The exact minimum for this item is confirmed with your quote.
From our workshop notes
- Why Drawers Stick and Dividers Come Off
- Why Silver Turns Black in a Jewelry Box
- Why Watch Pillows Never Fit
Project record
A presentation box that has to justify the watch inside it
Request a quote
Send us the spec. We'll send a number.
Unit price, tooling cost and lead time — usually within one working day.
Request a quoteWhat to send us
- Product type and target dimensions
- Quantity — and whether it may grow
- Logo and artwork, even if rough
- Your delivery deadline and market